I’m very excited to announce that LandArts has won our Green Ideas = Free Tools contest, and with that will be receiving over $1,000 in Pave Tech tools. Here’s the winning entry:
I try to minimize the use of wood with it’s limited life span. In the last year we have done several deck-to-patio conversions where a deck company comes in, rips out the old deck and replaces it with a much smaller landing and steps. Then we come in and install a rot-proof patio where the deck stood. It’s an EASY sell. Some homeowner go all-out and have the landing and steps constructed out of a recycled material like Trex. Grade level patios are more private and snug-feeling than elevated decks. Most decks are too small so we typically increase the size of the patio by at least 50% larger than what they had. Having the patio at the same grade as the lawn means kids can “play through” and when entertaining large groups can spill over onto the lawn.
When installing patios and walks we always find a way to reuse spoils. If there are no areas on site that need filling we might design a feature, such as a pondless waterfall that would benefit from raising the grade. If there is a recycling facility nearby, concrete and asphalt can be dropped off at little or no cost and crushed concrete base material picked up in a single trip. Saves money, saves time, saves fuel.
For the last three years our table saw has been replaced with a paver splitter. We use a lot of tumbled pavers and the splitter gives us a perfect “weathered” edge. Human-powered, no noise pollution, no expensive blade replacements.
We do a lot of water features and customers have been expressing concern about power costs and water usage. Sealing leaks (the idea is for the water to go OVER the rocks
) and testing and tweaking waterfalls means we can get away with using smaller, more economical pumps. A simple rainwater harvesting system will supply enough water to keep the water feature full and for hand watering of plants. A typical rain barrel will fill with rain in minutes…and be drained almost as quickly. A 560 gallon tank will fill with one good rainfall and provide water for weeks. Another idea is to tap onto the AC condensation pipe with flex PVC and run it into the water feature.
With rising gas prices and fairly long commutes to many of our work sites we’ve moved to a four-day work week. My guys typically are into overtime by noon on the fourth day. If there’s one day in the week when rain is expected we just go ahead and take that day off. No more driving 1.5 hours to work two hours on the job. An added benefit is the built-in rain day each week to help us stay on schedule. I’ve been trying to get my suppliers to stock all of the hardscape materials I typically use so we can get everything to the site with one delivery.
We’re looking at getting a cabover diesel dump truck. A biodiesel conversion would cost under 1k and there is a plant nearby making the stuff from chicken fat from poultry processing plants…but I wonder what that stuff smells like when it burns

) and testing and tweaking waterfalls means we can get away with using smaller, more economical pumps. A simple rainwater harvesting system will supply enough water to keep the water feature full and for hand watering of plants. A typical rain barrel will fill with rain in minutes…and be drained almost as quickly. A 560 gallon tank will fill with one good rainfall and provide water for weeks. Another idea is to tap onto the AC condensation pipe with flex PVC and run it into the water feature.

The Base Rake. A wide business end and tough construction designed to push and pull heavy crushed stone in preparation for pavers or block.
The Sand Pull. Looks like a concrete float, acts like a screed board. The Sand Pull is designed to allow you to pull larger amount of sand from your base prep while standing, reducing the labor needed for installation and possibly saving someone’s back in the process.
The Screed Board Pro. Lightweight and easy to handle, this magnesium screed board won’t flex while screeding, improving the quality of your base prep. Also, it’s durability means you won’t be buying another long screed board for awhile. And it won’t get twisted out of shape if you leave it out in the rain.
The String Along. Makes quick work of setting string elevations for your hardscape projects.
The Paver Pounder. A twist on the traditional hand tamper, with the Paver Pounder you place the head of the tamper on the stone or soil where you want to compact, then use the handle on the weighted inner sleeve to provide the force for compaction. No more snapped tamper corners because you struck the ground at an odd angle.
The Paver Broom. A sturdy bristle broom with reinforced brackets and a 24″ width to make sweeping in paver sand and cleaning up a breeze.
The Paver Square. You know about the Pythagoras’ Theorem and how a triangle with sides of unit length 3,4 and 5 nets you a right triangle. But in practice, when laying out a chalk line for the paver patio or drive you’re about to lay, it’s nearly impossible to get it perfect. With the Paver Square, 4 seconds and you have a perfect right triangle to use to check square, snap chalk lines, whatever. This is a time saver and will also improve the quality of your installs by improving your bond line consistency.

