|
I borrowed this from another site
Gypsum (calcium sulfate) aids to aleviate high concentrations of salt in soils
and is an excellent product for treating crusting soils. The problem with
gypsum is it is generally applied at the wrong time. Gypsum should be used
only when there is no lime and the calcium levels are below 2,500 parts per
million. 2.Gypsum400-600 pounds per acre
It's been claimed that adding gypsum can reduce compaction, improve soil
tilth, improve water infiltration, raise soil pH, lower soil pH, correct salt
problems and improve the calcium-to-magnesium ratio.
the only real benefit to applying gypsum, other than supplying sulfur if
needed, comes when it is applied to sodium-affected soils.
In cases where a sodium problem exists, gypsum, which is calcium sulfate,
supplies a soluble source of calcium that will displace some of the sodium.
The sodium can then be leached deeper into the soil profile as the soluble
salt sodium sulfate. If soils are sodium-affected, it often takes 1,500-3,000
lbs. of gypsum per acre to effectively remove enough sodium to improve soil
structure. "If soils are not sodium-affected, gypsum will not improve poor
soil structure.
|